Stormwater BMPs for Industrial Sector G, Metal Ore Mining Dressing Facilities, Stormwater Permitting Guide

Industrial Sector G, Metal Ore Mining Dressing Facilities

stormwater bmps > industrial-sector-g-metal-ore-mining-dressing-facilities

Common Scale-Based, Non-Structural Stormwater BMPs for Industrial Sector G:

Keep as much vegetation as possible when excavating and seed as necessary to minimize the amount of exposed soils.
Width and grade of roads should be as small as possible to meet regulatory requirements and designed to match the natural contours of the area.
Use serrated slopes, benched slopes, contouring, and stream alteration around piles for sediment control and runoff dispersion.
Use check dams, rock outlet protection, level spreaders, stream alternation, drop structures, serrated slopes, drain fields, benched slopes, contouring, and stream alteration for runoff dispersion.
If operations are uncovered, perform them on a concrete pad that is impervious and contained.
Promptly transfer used fluids to the proper container; do not leave full drip pans or other open containers around the shop. Empty and clean drip pans and containers.
Use drip pans, drain boards, and drying racks to direct drips back into a fluid holding tank for reuse.
Eliminate or reduce the number and amount of hazardous materials and waste by substituting nonhazardous or less hazardous materials.
If parts are dipped in liquid, remove them slowly to avoid spills
Perform inspection and preventive maintenance on fuel storage tanks to detect potential leaks before they occur.
And More...

Stormwater BMP Applicable SIC Codes for Industrial Sector G:

1021
1011
1021
1031
1041
1044
1061
1081
1094
1099

Common Type-Based, Structural BMPs for Industrial Sector G

Point BMP
- Constructed Wetland
- Infiltration Basin
- Bioretention
- Sand Filter (surface)
- Rain Barrel
- Cistern
- Wet Pond
- Dry Pond
Linear BMP
- Grassed Swale
- Infiltration Trench
- Vegetated Filter Strip
- Sand Filter (non-surface)
Area BMP
- Green Roof
- Porous Pavement

Common Pollutant Sources for Industrial Sector G:

Exposure of lumber, residues, and vehicles/equipment to precipitation
Parts cleaning
Waste disposal of oily rags, oil and gas filters, batteries, coolants, degreasers
Fluid replacement including hydraulic fluid, oil, transmission fluid, radiator fluids, and grease
Diesel fuel

Common Toxicants for Industrial Sector G

Nutrients
- nitrates
Pesticides
- 2,4-D γ -BHC (lindane)
- malathion
- atrazine
- chlordane
- diazinon
Other organics
- VOCs
- 1,3-dichloro-benzene
- anthracene
- benzo(a) anthracene
- benzo(b) fluoranthene
- benzo(k) fluoranthene
- benzo(a) pyrene
- bis (2-ethylhexyl) phthalate
- fluoranthene
- fluorene
- naphthalene
- pentachlorophenol
- phenanthrene
- pyrene
Pathogens
- enteroviruses
- Shigella
- Pseudomonas aeruginosa
- protozoa
Heavy Metals
- nickel
- cadmium
- chromium
- lead
- zinc
- copper
Salts
- chloride

Common Pollutants for Industrial Sector G:

BOD, TSS, oil, and grease
Solvents, oil, heavy metals, acid/alkaline wastes
Oil, heavy metals, solvents, acids
Oil and grease, arsenic, lead, cadmium, chromium, COD, and benzene
Diesel, gasoline, oil

Factors that can affect water quality:

Geographic location
Hydrogeology
Topography
Type, duration, and intensity of precipitation events
Extent of impervious surfaces (e.g., concrete or asphalt)
Type of ground cover (e.g., vegetation, crushed stone, or dirt)
Size of the operation

This site focuses or refers to information and services regarding Total Suspended Solids (TSS) Flocculant Socks Oil and Grease (O&G) Sheet Flow pH Notice of Non Applicability (NONA) Third Party Environmental Group (TPEG) Numeric Effluent Limitation (NEL) Non Detect Detected Not Quantifiable Storm Water Discharge Associated with Industrial Activity Debris Northern California Wattles Legally Responsible Person (LRP) Turbidity Storm Water Pollution Prevention Plan (SWPPP) Straw Wattles Storm Wattles Monitoring Implementation Plan Ontario Industrial General Permit (IGP) Qualifying Storm Event (QSE) Division of Water Quality (DWQ) Clean Water Act (CWA) Stormwater Drainage Plastic Materials New Industrial General Permit Total Organic Carbon (TOC) Standard Industrial Classification (SIC) Run-on Erosion Control BMPs Non stormwater Total Maximum Daily Load (TMDL) Sedimentation Non-Governmental Organization (NGO) Quality Assurance/Quality Control (QA/QC) Best Practicable Control Technology Currently Available (BPT) Permit Registration Documents (PRDs) Southern California United States Environmental Protection Agency (U.S. EPA) Sediment Control BMPs Minimum Level Wattle Effective Date Water Quality Based Effluent Limitation (WQBEL) Field Measurements Qualified Industrial Storm water Practitioner (QISP) Notice of Intent (NOI) Runoff Control BMPs Stormwater Benchmarks Multi Sector General Permit (MSGP) Industrial Materials Toxicity Waters of the United States Industrial Storm wattles Sediment Storm Water Systems (SWS) Scrap Metal Permit Regional Water Board Operator North American Industrial Classification System (NAICS) Water Quality Objectives Municipal Separate Storm Sewer System (MS4) Discharger Chain of Custody Facility New Source Performance Standards (NSPS) Effluent Limitation State Water Resources Control Board (SWRCB) New Source Performance Standards National Pollutant Discharge Elimination System (NPDES) Effluent Limitations Guidelines (ELGs) Technology Based Effluent Limitation (TBEL) Trade Secret Water Quality Standards Waste Discharge Identification Number (WDID) No Exposure Certification (NEC) Stormwater Discharge Points Exceedance Response Action (ERA) Numeric Action Level (NAL) Best Conventional Pollutant Control Technology (BCT) Third Party Environmental Lawsuit (TPEL) Storm Water Multiple Application and Report Tracking System (SMARTS) Best Available Technology Economically Achievable (BAT) Scheduled Facility Operating Hours Best Management Practices (BMP) Effluent Storm wattle Stormwater Permit Non Storm Water Discharges (NSWD) Natural Background Numeric Action Level (NAL) Exceedance Method Detection Limit Biochemical Oxygen Demand (BOD) Structural Controls Drainage Area State water Board Stormwater Notice of Termination (NOT) Areas of Special Biological Significance (ASBS) Stormwater Guarantee Erosion Total Dissolved Solids (TDS) Good Housekeeping BMPs Source New Discharge(r) Monitoring Requirements and more.

In addition, stormwater filtration media stormwater expert witness california environmental management oil solidifying pillows stormwater hazardous materials business plan california stormwater runoff sampling stormwater management services non-stormwater observation united states stormwater safety inspection plan stormwater environmental stormwater expert consultation oil solidifying booms stormwater benchmarks stormwater observation report stormwater record keeping stormwater plan of action stormwater sand filters stormwater treatment stormwater oil sheen sock stormwater regulations california stormwater discharge health and safety consultation stormwater annual report swppp stormwater osha plastic inlet filter stormwater osha safety and health inspection stormwater rain information stormwater hmbp california stormwater mechanical filtration stormwater engineer services stormwater consultant stormwater sampling california stormwater news california stormwater regulations penalties stormwater compliance audit industrial wattle stormwater vessels stormwater quarterly observation non-stormwater observation report and more.

Stormwater Permits for SIC Codes:

Disclaimer: Informational and educational purposes. Self-help services (not legal advice). Site is not affiliated with any state agency. Note that site might not contain the most updated information. Your receipt of any information from this site does not create a relationship. Prior results do not guarantee or suggest a similar result in other matters. No promise is made with regard to services or content's reliability, availabilty, or ability to meet any needs. Information and services provided "AS IS."

All Rights Reserved