Stormwater BMPs for Industrial Sector I, Oil Gas Extraction Facilities, Stormwater Permitting Guide

Industrial Sector I, Oil Gas Extraction Facilities

stormwater bmps > industrial-sector-i-oil-gas-extraction-facilities

Common Scale-Based, Non-Structural Stormwater BMPs for Industrial Sector I:

Use diking and other forms of containment and diversion around material handling and processing areas.
Re-use collected stormwater for industrial process or as an irrigation source.
Prevent and contain spills and drips.
Drain all parts of fluids prior to disposal. Oil filters can be crushed and recycled.
Clean up leaks, drips, and other spills without using large amounts of water. Use absorbents for dry cleanup whenever possible.
Do not pour liquid waste into floor drains, sinks, outdoor storm drain inlets, or other storm drains or sewer connections
Minimize/eliminate run-on into fueling areas with diversion dikes, berms, curbing, surface grading or other equivalent measures.
Regularly inspect and perform preventive maintenance on fuel storage tanks to detect potential leaks before they occur.
Re-use collected stormwater for industrial process or as an irrigation source.
Use drip pan under the transfer hose.
And More...

Stormwater BMP Applicable SIC Codes for Industrial Sector I:

1311
1321
1381
1382
1389

Common Type-Based, Structural BMPs for Industrial Sector I

Point BMP
- Constructed Wetland
- Infiltration Basin
- Bioretention
- Sand Filter (surface)
- Rain Barrel
- Cistern
- Wet Pond
- Dry Pond
Linear BMP
- Grassed Swale
- Infiltration Trench
- Vegetated Filter Strip
- Sand Filter (non-surface)
Area BMP
- Green Roof
- Porous Pavement

Common Pollutant Sources for Industrial Sector I:

Exposure of lumber, residues, and vehicles/equipment to precipitation
Parts cleaning
Waste disposal of oily rags, oil and gas filters, batteries, coolants, degreasers
Fluid replacement including hydraulic fluid, oil, transmission fluid, radiator fluids, and grease
Diesel fuel

Common Toxicants for Industrial Sector I

Nutrients
- nitrates
Pesticides
- 2,4-D γ -BHC (lindane)
- malathion
- atrazine
- chlordane
- diazinon
Other organics
- VOCs
- 1,3-dichloro-benzene
- anthracene
- benzo(a) anthracene
- benzo(b) fluoranthene
- benzo(k) fluoranthene
- benzo(a) pyrene
- bis (2-ethylhexyl) phthalate
- fluoranthene
- fluorene
- naphthalene
- pentachlorophenol
- phenanthrene
- pyrene
Pathogens
- enteroviruses
- Shigella
- Pseudomonas aeruginosa
- protozoa
Heavy Metals
- nickel
- cadmium
- chromium
- lead
- zinc
- copper
Salts
- chloride

Common Pollutants for Industrial Sector I:

BOD, TSS, oil, and grease
Solvents, oil, heavy metals, acid/alkaline wastes
Oil, heavy metals, solvents, acids
Oil and grease, arsenic, lead, cadmium, chromium, COD, and benzene
Diesel, gasoline, oil

Factors that can affect water quality:

Geographic location
Hydrogeology
Topography
Type, duration, and intensity of precipitation events
Extent of impervious surfaces (e.g., concrete or asphalt)
Type of ground cover (e.g., vegetation, crushed stone, or dirt)
Size of the operation

This site focuses or refers to information and services regarding Discharger Erosion No Exposure Certification (NEC) Best Management Practices (BMP) Waters of the United States New Source Performance Standards Facility Water Quality Objectives Oil and Grease (O&G) Trade Secret Run-on Plastic Materials Non Storm Water Discharges (NSWD) Numeric Action Level (NAL) Municipal Separate Storm Sewer System (MS4) Industrial General Permit (IGP) Standard Industrial Classification (SIC) Waste Discharge Identification Number (WDID) Stormwater Permit Method Detection Limit Legally Responsible Person (LRP) Structural Controls Runoff Control BMPs Technology Based Effluent Limitation (TBEL) Permit Registration Documents (PRDs) National Pollutant Discharge Elimination System (NPDES) Detected Not Quantifiable Good Housekeeping BMPs Exceedance Response Action (ERA) Scheduled Facility Operating Hours Clean Water Act (CWA) Industrial Storm wattles Best Conventional Pollutant Control Technology (BCT) Total Maximum Daily Load (TMDL) New Industrial General Permit Total Suspended Solids (TSS) Best Available Technology Economically Achievable (BAT) Chain of Custody Field Measurements Straw Wattles Third Party Environmental Lawsuit (TPEL) Stormwater Discharge Points Monitoring Implementation Plan Sedimentation Biochemical Oxygen Demand (BOD) Toxicity Natural Background Industrial Materials Stormwater Benchmarks Erosion Control BMPs Multi Sector General Permit (MSGP) Third Party Environmental Group (TPEG) Non-Governmental Organization (NGO) Non Detect Sheet Flow Storm wattle Effective Date Southern California Water Quality Standards Non stormwater Areas of Special Biological Significance (ASBS) Notice of Intent (NOI) State Water Resources Control Board (SWRCB) Sediment Flocculant Socks Water Quality Based Effluent Limitation (WQBEL) Storm Water Multiple Application and Report Tracking System (SMARTS) Qualifying Storm Event (QSE) Storm Water Systems (SWS) Qualified Industrial Storm water Practitioner (QISP) Storm Water Discharge Associated with Industrial Activity Northern California Best Practicable Control Technology Currently Available (BPT) North American Industrial Classification System (NAICS) Scrap Metal Permit New Source Performance Standards (NSPS) Wattles Drainage Area Numeric Action Level (NAL) Exceedance Source United States Environmental Protection Agency (U.S. EPA) Notice of Termination (NOT) Minimum Level Total Dissolved Solids (TDS) Stormwater Guarantee pH Numeric Effluent Limitation (NEL) Wattle Quality Assurance/Quality Control (QA/QC) Regional Water Board Turbidity Monitoring Requirements Total Organic Carbon (TOC) Effluent Limitations Guidelines (ELGs) Debris Stormwater Drainage Sediment Control BMPs Division of Water Quality (DWQ) Storm Wattles Effluent Storm Water Pollution Prevention Plan (SWPPP) Ontario Notice of Non Applicability (NONA) New Discharge(r) State water Board Stormwater Operator Effluent Limitation and more.

In addition, stormwater expert consultation oil solidifying booms stormwater sampling california stormwater safety inspection plan stormwater treatment stormwater runoff sampling stormwater annual report industrial wattle stormwater regulations california swppp stormwater environmental stormwater record keeping stormwater management services united states stormwater rain information stormwater discharge stormwater oil sheen sock stormwater consultant plastic inlet filter stormwater expert witness california stormwater observation report stormwater regulations penalties non-stormwater observation stormwater osha stormwater filtration media environmental management stormwater osha safety and health inspection stormwater hazardous materials business plan california stormwater benchmarks stormwater hmbp california stormwater sand filters stormwater vessels stormwater mechanical filtration non-stormwater observation report stormwater quarterly observation stormwater compliance audit stormwater plan of action health and safety consultation stormwater news california stormwater engineer services oil solidifying pillows and more.

Stormwater Permits for SIC Codes:

Disclaimer: Informational and educational purposes. Self-help services (not legal advice). Site is not affiliated with any state agency. Note that site might not contain the most updated information. Your receipt of any information from this site does not create a relationship. Prior results do not guarantee or suggest a similar result in other matters. No promise is made with regard to services or content's reliability, availabilty, or ability to meet any needs. Information and services provided "AS IS."

All Rights Reserved